Harness lambda probe transistorized ignition system wiring — MK2 Golf KR 16V (1990 - 1991)
Factory title: Volkswagen Golf (1990 - 1992) - Wiring set for battery and 3-phase alternator. Earth line
Harness lambda probe transistorized ignition system wiring for the Volkswagen Golf Mk2 (1990 - 1991): factory exploded diagram 253000 from the Volkswagen ETKA parts catalogue, group 06 Wiring looms, listing 31 OEM part numbers across 36 catalogued positions including 443 957 818 C, 191 971 130 and 871 906 365. Parts on this plate carry the engine codes 2G, EZ, GU, HZ, KR, RF and RH. Published by Type 19 Specialists; the complete MK2 Golf catalogue is in print as the Mk2 Golf Master Parts Catalogue.
Parts on this diagram
This MK2 Golf plate lists 31 OEM part numbers across 36 numbered positions.
15 hotspots (partial)
| № | Description | Part number |
|---|---|---|
| wiring harness fortransistorized ignition system KR KR | — | |
| wiring harness fortransistorized ignition system Wiring set for control unitfor vehicles with retro fittedlambda regulated exhaustemission system see illustration: EZ,GU,HZ,RF,RH,2 G,ABN 2 G,ABN EZGUHZRFRH2G | — | |
| harness for lambda probe andtransistorized ignition system Wiring set for control unitfor vehicles with retro fittedlambda regulated exhaustemission system see illustration: 253-001 EZ,GU,HZ,RF,RH,KR,ABN,2 G 2 G,ABN 253-001 EZGUHZRFRHKR2G | — | |
| - | Cable tie with hose retainer Connection piece Knock sensor 7 X 273-8 7 X 273-8 EZGUHZRFRHKR2G | 443 957 818 C |
| - | Flat contact housingfor vehicles with retro fittedlambda regulated exhaustemission system EZ,GU,RF EZGURF | 161 971 970 |
| - | harness for lambda probe EZGUHZRFRHKR2G | 191 971 130 |
| - | flat contact housing withgasket EZGUHZRFRHKR2G | 871 906 365 |
| - | Seal Flat contact housing 16 X 50 16 X 50 EZGUHZRFRHKR2G | 871 906 375 A |
| (1) | harness for lambda probe andtransistorized ignition systemfor vehicles with retro fittedlambda regulated exhaustemission system EZ,GU,RF EZGURF | 191 971 754 B |
| (12) | Protective cap Flat contact housing EZGUHZRFRHKR2G | 037 906 102 A |
| (15) | Flat contact housing Connection piece Resistor Temperature sensor EZGUHZRFRHKR2G | 191 971 922 |
| (16) | Grommet 46/10 46/10 EZGUHZRFRHKR2G | 357 971 905 E |
| (18) | flat connector housing also use:Connection piecewiring harness: front right 357 972 741 ADIGIFITZ 357 972 741 ADIGIFITZ EZGUHZRFRHKR2G | 357 972 763 |
| (18) | flat connector housing also use:Connection piecewiring harness: front right 357 972 741 A 357 972 741 A EZGUHZRFRHKR2G | 357 972 762 |
| (20) | Flat contact housing also use: 191 906 102 191 906 102 EZGUHZRFRHKR2G | 443 906 236 |
| (3) | Protective cap Flat contact housing EZGUHZRFRHKR2G | 037 906 102 A |
| (6) | Flat contact housingfor vehicles with retro fittedlambda regulated exhaustemission system EZ,GU,RF EZGURF | 161 971 990 A |
| (7) | Flat contact housing also use: 191 906 102 191 906 102 EZGUHZRFRHKR2G | 443 906 236 |
| (8) | wiring harness fortransistorized ignition system EZGUHZRFRHKR2G | 192 971 132 B |
| (8) | wiring harness fortransistorized ignition system DIGIFITZ DIGIFITZ EZGUHZRFRHKR2G | 191 971 132 H |
| (8) | wiring harness fortransistorized ignition system also use:** see current flow diagram * 357 972 762 357 972 762 EZGUHZRFRHKR2G | 191 971 132 H |
| 1 | wiring harness fortransistorized ignition system EZGUHZRFRHKR2G | 192 971 131 C |
| 10 | discontinued part EZGUHZRFRHKR2G | — |
| 11 | Cable ties For hole/material thickness: 4,5 X 2006,5 / 0,3-3 4,5 X 2006,5 / 0,3-3 EZGUHZRFRHKR2G | N 906 661 01 |
| 11 | Cable ties 6,5 X 175 6,5 X 175 EZGUHZRFRHKR2G | N 900 603 01 |
| 11 | Cable ties with brackettoothed quadrant For hole/material thickness: 4,5 X 2006,5 / 0,3-3 4,5 X 2006,5 / 0,3-3 EZGUHZRFRHKR2G | 3D0 971 838 N |
| 13 | Flat contact housing EZGUHZRFRHKR2G | 071 906 233 |
| 14 | Protective cap 20,5 X 11 20,5 X 11 EZGUHZRFRHKR2G | 191 906 376 A |
| 17 | Flat contact housing EZGUHZRFRHKR2G | 111 971 921 B |
| 18 | flat connector housing EZGUHZRFRHKR2G | 161 971 988 C |
| 2 | discontinued part EZGUHZRFRHKR2G | — |
| 4 | Flat contact housing EZGUHZRFRHKR2G | 071 906 233 |
| 5 | Grommet 46/8 46/8 EZGUHZRFRHKR2G | 1H0 971 913 B |
| 6 | Flat contact housing EZGUHZRFRHKR2G | 111 971 921 B |
| 9 | oval head panel screw B 2,9 X 9,5 B 2,9 X 9,5 EZGUHZRFRHKR2G | N 013 953 2 |
| 9 | oval head panel screw 2,9 X 9,5 2,9 X 9,5 EZGUHZRFRHKR2G | N 013 953 7 |
From the Type 19 workshop
Volkswagen Golf Mk2 work in the Type 19 workshop — the same cars these kr 16v diagrams are drawn from.
Fitment and applicability
What this plate covers, as the factory catalogue records it — nothing here is inferred from the part names.
- Vehicle
- Volkswagen Golf Mk2
- Model years
- 1990 - 1991
- Generation region
- RDW
- Generation code
- 110
- Engine codes on this plate
- 2G, EZ, GU, HZ, KR, RF, RH
- Variant tags
- petrol_16v, petrol_8v_base
- Factory group
- 06 Wiring looms
- Factory subgroup
- 253000
Related factory diagrams
Other published kr 16v plates for the MK2 Golf in this catalogue.
The complete MK2 Golf parts catalogue in print
Questions about this diagram
- Which VW part numbers are on the harness lambda probe transistorized ignition system wiring diagram for the MK2 Golf?
- This diagram lists 31 OEM part numbers for the MK2 Golf. The first three are 443 957 818 C, 191 971 130 and 871 906 365.
- Which MK2 Golf years and engines does this diagram cover?
- This plate is from the MK2 Golf 1990 - 1991 generation (RDW). The parts on it carry the engine codes 2G, EZ, GU, HZ, KR, RF and RH.
- Where is the complete MK2 Golf factory parts catalogue?
- The Mk2 Golf Master Parts Catalogue is available in print and as a PDF from Type 19 Specialists at /shop/library/catalogue-mk2-full/. It carries every plate in this catalogue, not just this one.