Output shaft for 5 speed manual transmiss gears and shafts — Mk4 Golf Gearbox (2003 - 2004)
Factory title: Volkswagen Golf/Golf R32 (2003 - 2006) - Output shaft. for 5 speed manual transmiss.. gears and shafts
Output shaft for 5 speed manual transmiss gears and shafts for the Volkswagen Golf Mk4 (2003 - 2004): factory exploded diagram 311057 from the Volkswagen ETKA parts catalogue, group 02 Gearbox, listing 19 OEM part numbers across 21 catalogued positions including 02M 311 103 F, 02M 311 103 G and 02M 311 509 K. Published by Type 19 Specialists; the complete Mk4 Golf catalogue is in print as the Mk4 Golf Master Parts Catalogue.
Parts on this diagram
This Mk4 Golf plate lists 19 OEM part numbers across 21 numbered positions.
| № | Description | Part number |
|---|---|---|
| gears and shafts Input shaft 6-speed manual transmissionfor four-wheel drive FEL,ERE,ESW,FMP,GQT | — | |
| (1) | Input shaft Z=14+23 ERE,FMP,GQT Z=14+23 | 02M 311 103 F |
| (1) | Input shaft Z=13+23 FEL,ESW Z=13+23 | 02M 311 103 G |
| (10) | reverse gear idler spindle Z=36+14 FEL,ESW Z=36+14 | 02M 311 509 K |
| (10) | reverse gear idler spindle Z=34+14 ERE,FMP,GQT Z=34+14 | 02M 311 509 J |
| (3) | gear 47/3245/41 FMP 47/3245/41 | 02M 311 286 H |
| (3) | gear 47/3237/34 GQT 47/3237/34 | 02M 311 286 P |
| (3) | gear 47/3246/40 ERE 47/3246/40 | 02M 311 286 F |
| (3) | gear 45/3441/45 FEL,ESW 45/3441/45 | 02M 311 286 J |
| (4) | gear 43/36 ERE 43/36 | 02M 311 361 E |
| (4) | gear 41/37 FMP,GQT 41/37 | 02M 311 361 G |
| (4) | gear 37/41 FEL,ESW 37/41 | 02M 311 361 H |
| (6) | 1 set circlips 1,79-1,98 1,79-1,98 | 02M 398 008 |
| (7) | 1 set shims 0,7-2,4 0,7-2,4 | 084 498 383 A |
| 11 | thrust washer 25,1 X 45 X 3,5 25,1 X 45 X 3,5 | 02M 311 517 |
| 12 | Needle bush 25 X 37+50 X 22,5 25 X 37+50 X 22,5 | 02M 311 523 A |
| 13 | Gear housing see illustration: 301-049 301-049 | — |
| 2 | Taper roller bearing 30 X 55 X 17,65 30 X 55 X 17,65 | 02M 311 124 A |
| 2B | Retaining plate | 02M 311 128 |
| 2C | Hexagon bolt M 7 X 1,25 X 19 M 7 X 1,25 X 19 | N 901 678 02 |
| 5 | Taper roller bearing 30 X 62 X 17 30 X 62 X 17 | 02M 311 123 |
From the Type 19 workshop
Volkswagen Golf Mk4 work in the Type 19 workshop — the same cars these gearbox diagrams are drawn from.
Fitment and applicability
What this plate covers, as the factory catalogue records it — nothing here is inferred from the part names.
- Vehicle
- Volkswagen Golf Mk4
- Model years
- 2003 - 2004
- Generation region
- MEX, RDW
- Generation code
- 405
- Factory group
- 02 Gearbox
- Factory subgroup
- 311057
Related factory diagrams
Other published gearbox plates for the Mk4 Golf in this catalogue.
The complete Mk4 Golf parts catalogue in print
Questions about this diagram
- Which VW part numbers are on the output shaft for 5 speed manual transmiss gears and shafts diagram for the Mk4 Golf?
- This diagram lists 19 OEM part numbers for the Mk4 Golf. The first three are 02M 311 103 F, 02M 311 103 G and 02M 311 509 K.
- Which Mk4 Golf years and engines does this diagram cover?
- This plate is from the Mk4 Golf 2003 - 2004 generation (MEX, RDW). The factory catalogue records no engine-code restriction on it, so it applies to all engines listed in the factory catalogue for this generation.
- Where is the complete Mk4 Golf factory parts catalogue?
- The Mk4 Golf Master Parts Catalogue is available in print and as a PDF from Type 19 Specialists at /shop/library/catalogue-mk4-mechanical/. It carries every plate in this catalogue, not just this one.