Which VW part numbers are on the rear lid golf diagram for the MK2 Golf?

This diagram lists 82 OEM part numbers for the MK2 Golf. The first three are 191 867 775 A 0 1C, 191 827 271 and 191 827 272.

Which MK2 Golf years and engines does this diagram cover?

This plate is from the MK2 Golf 1989 generation (RDW). The factory catalogue records no engine-code restriction on it, so it applies to all engines listed in the factory catalogue for this generation.

Where is the complete MK2 Golf factory parts catalogue?

The Mk2 Golf Master Parts Catalogue is available in print and as a PDF from Type 19 Specialists at /shop/library/catalogue-mk2-full/. It carries every plate in this catalogue, not just this one.

Rear lid golf — MK2 Golf Rear Body (1989)

Factory title: Volkswagen Golf (1989) - Rear lid

Generation: MK2 1989 (RDW) Group: Rear body Parts: 87 Primary OEM: 191 867 775 A 0 1C, 191 827 271, 191 827 272

Rear lid golf for the Volkswagen Golf Mk2 (1989): factory exploded diagram 155000 from the Volkswagen ETKA parts catalogue, group 24 Rear body, listing 82 OEM part numbers across 87 catalogued positions including 191 867 775 A 0 1C, 191 827 271 and 191 827 272. Published by Type 19 Specialists; the complete MK2 Golf catalogue is in print as the Mk2 Golf Master Parts Catalogue.

Parts on this diagram

This MK2 Golf plate lists 82 OEM part numbers across 87 numbered positions.

61 hotspots (partial)

Exploded view from the factory parts catalogue. Click a row in the parts table to highlight its position on this diagram. Click any position on the diagram to scroll to its row.

№	Description	Part number
	Satin black	191 867 775 A 0 1C
	Rear lid GOLF	—
-	Repair panellids inner skin	191 827 271
-	Repair panellids inner skin	191 827 272
-	2-pack polyurethane adhesive 50 ML 50 ML	D 180 KD2 A1
-	Static mixer	D 001 001
-	Cover cap 4,2 X 15,5 4,2 X 15,5	191 971 910 A
-	Bungs 6,8 X 15,5 6,8 X 15,5	1H6 971 910 A
-	Retainer for cover Holding strap	191 867 775 A
-	Protective film 290 X 210 MM 290 X 210 MM	AKL 448 300 04
-	Grommet 9 9	861 877 399
-	1 set lock cylinders fordoor handle, rear flap,ignition switch, fuel tankcap andglove compartment lid see illustration: 159 159	—
-	Clipfor plastic flap "D..":post	191 827 310
-	Washerfor plastic flap 4,3 X 12 X 1 "D..":post 4,3 X 12 X 1	N 011 664 4
-	Seal'bestelleinheit 20'	AKL 450 S45 20
-	Washerfor plastic flap 4,1 X 12 X 0,8 "D..":post 4,1 X 12 X 0,8	N 011 693 1
-	plastic sealing strip 20 X 2 X 5000 MM 20 X 2 X 5000 MM	D 486 020 A5
-	Washerfor plastic flap 4,3 X 8 X 0,5 "D..":post 4,3 X 8 X 0,5	N 011 555 5
-	oval head panel screwfor plastic flap 3,9 X 16 "D..":post 3,9 X 16	N 013 962 2
-	Speed nutfor plastic flap "D..":post	191 827 590
-	Retaining bracketfor plastic flap "D..":post	191 827 588
-	Protective film for side panel'order quantity 25'	321 853 407
(1)	Rear lid	191 827 025 E
(12)	pull rodfor plastic flap "D..":post	191 827 515 A
(16)	Ball stud	533 827 345 C
(17)	Lock cylinder for rearlidprofile ahfor vehicles with centrallocking system	191 827 573 B
(17)	Lock cylinder for rearlidsystem 'b' profile ah 1001-2000/3001-4000/6001-7086/8201-9282 For vehicle withoutcentral locking	191 827 573 A
(17)	Lock cylinder for rearlidsystem 'a' profile ah 1-1000/2001-3000/4001-6000/7101-8154 For vehicle withoutcentral locking	191 827 573
(18)	Pushbuttonfor vehicles with centrallocking system	191 827 581 C
(2)	Lid hingefor plastic flap "D..":post	191 827 301
(24)	Sealfor plastic flap "D..":post	191 827 594 A
(40)	insert nutfor plastic flap "D..":post	191 827 998 A
(42)	oval head panel screwfor plastic flap 3,5 X 19 "D..":post 3,5 X 19	N 013 950 2
10	Striker plate	191 827 511
11	Socket head bolt withhexagon socket head M 8 X 15 M 8 X 15	N 014 770 2
11A	Washer	211 843 661
12	pull rod	191 827 515
13	Clip	191 837 199
14	Puffer 30 X 22/12 30 X 22/12	867 827 500
14	Stop buffer 30 X 22/12 30 X 22/12	867 827 500 A
15A	Gas filled strut	191 827 550 B
15B	Clip	443 823 397
16A	button withlock cylinderfor vehicles with centrallocking system For vehicle withoutcentral locking also use: 191 827 594 191 827 594	191 827 571 E
18	Pushbutton For vehicle withoutcentral locking	191 827 581 B
19	Spacer ring	321 827 596
2	Lid hinge	867 827 301
20	Belleville spring No longer available A 16 A 16	—
22	grip molding	191 827 577 C
23	expanding nut	191 827 584
23	expanding nut	1H6 827 584 A
24	Seal	191 827 594
25	oval head panel screw 6,3 X 25 6,3 X 25	N 013 935 1
28	gasket for flap	191 827 705 B
3	Belleville spring 6,4 X 12,5 6,4 X 12,5	111 837 941
30	Washer 8,4 X 16 X 1,6 8,4 X 16 X 1,6	N 011 525 27
30	Washer A 8,4 X 16 X 1,6 A 8,4 X 16 X 1,6	N 011 525 20
30	Washer A 8,4 A 8,4	N 011 525 13
32	Securing bars 10 10	N 015 528 3
33	seal ring	111 837 227 B
34	Retaining washer 8 8	N 012 439 2
35	Pressure spring	321 827 589
36	seal ring 18,5 X 2 18,5 X 2	N 900 989 01
37	Securing ring 19 X 1,2 19 X 1,2	N 012 419 1
38	see illustration: 159 159	—
3A	Seal make up from: D 486 020 A 5 D 486 020 A 5	—
4	fillister hd. bolt M 6 X 15 M 6 X 15	N 014 140 5
40	insert nut	321 813 998 A
41	Sealing plate	171 853 919
42	oval head panel screw 4,8 X 19 4,8 X 19	N 013 975 5
42	oval head panel screw B 4,8 X 19 B 4,8 X 19	N 013 975 6
42	oval head panel screw 4,8 X 19 4,8 X 19	N 013 975 20
44	Spoiler GOLF GTI,GT,GTD	191 827 933
45	Washer 7 X 12 X 1,2 GOLF GTD,GT,GTI 7 X 12 X 1,2	N 011 652 1
46	Grommet GOLF GTD,GT,GTI	191 827 976
47	Hexagon collar nut M 5 GOLF GTD,GT,GTI M 5	171 857 026 A
47	Hexagon collar nut M 5 GOLF GTD,GT,GTI M 5	N 100 173 04
47	Hexagon nut M 5 GOLF GTD,GT,GTI M 5	N 902 524 01
48	Cover cap 8 X 6,5 GOLF GTD,GT,GTI 8 X 6,5	N 100 297 01
49	Bungs 28 X 14/2,2 28 X 14/2,2	191 971 910
5	Washer B 6,1 X 18 X 2 B 6,1 X 18 X 2	N 011 666 10
5	Washer 6,4 X 18 X 1,6 6,4 X 18 X 1,6	N 011 666 20
5	Washer 6,4 X 18 X 1,6 6,4 X 18 X 1,6	N 011 666 15
6	spring ring 6 6	N 012 006 4
7	Hexagon bolt M 6 X 15 M 6 X 15	N 010 215 13
7	Hexagon bolt M 6 X 15 M 6 X 15	N 010 215 27
8	Lid lock	191 827 505
9	oval head countersunk bolt M 8 X 32 M 8 X 32	N 021 416 3

From the Type 19 workshop

Volkswagen Golf Mk2 work in the Type 19 workshop — the same cars these rear body diagrams are drawn from.

Mk2 Golf Restoration Welding work #mk2golf #mechanic #volkswagen #migwelding #carrestoration Mostly typical repair work we see on almost every Mk2 Golf we’ve worked on. Safe to say the Mk3 Golf is pretty similar too!

Fitment and applicability

What this plate covers, as the factory catalogue records it — nothing here is inferred from the part names.

Vehicle: Volkswagen Golf Mk2
Model years: 1989
Generation region: RDW
Generation code: 092
Factory group: 24 Rear body
Factory subgroup: 155000

Related factory diagrams

Other published rear body plates for the MK2 Golf in this catalogue.

Boot floor plate rear cross panel golf 1984 · subgroup 145000
Rear lid golf 1984 · subgroup 155000
Boot floor plate rear cross panel golf 1986 · subgroup 145000
Rear lid golf 1986 · subgroup 155000
Boot floor plate rear cross panel golf 1987 · subgroup 145000
Rear lid golf 1987 · subgroup 155000
Boot floor plate rear cross panel golf 1988 · subgroup 145000
Rear lid golf 1988 · subgroup 155000

The complete MK2 Golf parts catalogue in print

Questions about this diagram

Which VW part numbers are on the rear lid golf diagram for the MK2 Golf?: This diagram lists 82 OEM part numbers for the MK2 Golf. The first three are 191 867 775 A 0 1C, 191 827 271 and 191 827 272.
Which MK2 Golf years and engines does this diagram cover?: This plate is from the MK2 Golf 1989 generation (RDW). The factory catalogue records no engine-code restriction on it, so it applies to all engines listed in the factory catalogue for this generation.
Where is the complete MK2 Golf factory parts catalogue?: The Mk2 Golf Master Parts Catalogue is available in print and as a PDF from Type 19 Specialists at /shop/library/catalogue-mk2-full/. It carries every plate in this catalogue, not just this one.