Harness lambda probe transistorized ignition systemfor — MK2 Golf Wiring Looms (1989)
Factory title: Volkswagen Golf (1989) - Wiring set for battery and 3-phase alternator. Earth line
Harness lambda probe transistorized ignition systemfor for the Volkswagen Golf Mk2 (1989): factory exploded diagram 253020 from the Volkswagen ETKA parts catalogue, group 06 Wiring looms, listing 35 OEM part numbers across 37 catalogued positions including N 906 437 01, 191 906 365 and 155 906 375 A. Parts on this plate carry the engine codes NZ, PB, PF and PL. Published by Type 19 Specialists; the complete MK2 Golf catalogue is in print as the Mk2 Golf Master Parts Catalogue.
Parts on this diagram
This MK2 Golf plate lists 35 OEM part numbers across 37 numbered positions.
46 hotspots (partial)
| № | Description | Part number |
|---|---|---|
| harness for lambda probe andtransistorized ignition systemfor vehicles with Knock sensor** see current flow diagram *Wiring set for control unitfor vehicles with retro fittedlambda regulated exhaustemission system see illustration: PB,PF,PL,NZ,RVPB PBPFPLNZ | — | |
| - | Cable tie with holder for weld pin: 10 X 1875 10 X 1875 PBPFPLNZ | N 906 437 01 |
| - | flat contact housing withgasket PBPFPLNZ | 191 906 365 |
| - | Seal Flat contact housing 16 X 85,5 16 X 85,5 PBPFPLNZ | 155 906 375 A |
| - | flat contact housing withgasket PBPFPLNZ | 871 906 365 |
| - | Seal Flat contact housing 16 X 50 16 X 50 PBPFPLNZ | 871 906 375 A |
| - | Clip Connection piece Cross panel 3-12 3-12 PBPFPLNZ | 191 971 844 |
| (1) | harness for lambda probe PF,RV,NZ PFNZ | 701 971 108 |
| (11) | Protective cap PBPFPLNZ | 191 906 102 |
| (12) | Grommet 46/16 46/16 PBPFPLNZ | 357 971 905 E |
| (18) | Flat contact housing also use: 191 906 102 191 906 102 PBPFPLNZ | 443 906 236 |
| (2) | wiring harness fortransistorized ignition system** see current flow diagram * PF,RV,PB PFPB | 191 971 758 J |
| (2) | wiring harness fortransistorized ignition system NZ NZ | 191 971 761 C |
| (2) | wiring harness fortransistorized ignition system DIGIFANT PF,RV DIGIFANT PF | 192 971 758 H |
| (2) | wiring harness fortransistorized ignition system DIGIFANT PB DIGIFANT PB | 192 971 758 J |
| (2) | No longer available PBPFPLNZ | — |
| (2) | wiring harness fortransistorized ignition system PL PL | 191 971 150 B |
| (2) | wiring harness fortransistorized ignition system DIGIFITZ PL DIGIFITZ PL | 191 971 150 C |
| (2) | wiring harness fortransistorized ignition system** see current flow diagram * PB,PF,RV PBPF | 191 971 758 K |
| (3) | Cable ties 3,6 X 246 3,6 X 246 PBPFPLNZ | N 020 902 2 |
| (5) | Protective cap PBPFPLNZ | 037 906 102 A |
| (6) | Grommet 18 X 20,5 18 X 20,5 PBPFPLNZ | 443 906 102 B |
| (7) | Flat contact housing Connection piece Idling switchswitch - altitude corrector Switchthrottle valve adapterfuel metering valve Knock sensor PBPFPLNZ | 443 906 233 |
| (8) | flat contact housing withgasket PBPFPLNZ | 443 906 232 |
| 1 | harness for lambda probe PL PL | 443 971 108 A |
| 10 | Protective cap 20,5 X 11 20,5 X 11 PBPFPLNZ | 191 906 376 A |
| 13 | Flat contact housing Connection piece Coupling element Ignition coil Lambda probe PBPFPLNZ | 111 971 921 B |
| 14 | flat connector housing Connection piecewiring harness: front right air condit. PBPFPLNZ | 161 971 975 |
| 15 | flat connector housing Connection piece air condit.Coupling elementwiring harness: front right PBPFPLNZ | 161 971 988 C |
| 16 | rd. connector sleeve housing Connection piece Lambda probe PBPFPLNZ | 171 971 999 A |
| 17 | Grommet 12,5 X 31 12,5 X 31 PBPFPLNZ | 810 972 525 |
| 19 | oval head panel screw B 2,9 X 9,5 B 2,9 X 9,5 PBPFPLNZ | N 013 953 2 |
| 19 | oval head panel screw 2,9 X 9,5 2,9 X 9,5 PBPFPLNZ | N 013 953 7 |
| 4 | Cable ties 6,5 X 175 6,5 X 175 PBPFPLNZ | N 900 603 01 |
| 4 | Cable ties with brackettoothed quadrant For hole/material thickness: 4,5 X 2006,5 / 0,3-3 4,5 X 2006,5 / 0,3-3 PBPFPLNZ | 3D0 971 838 N |
| 4 | Cable ties For hole/material thickness: 4,5 X 2006,5/0,3-3 MM 4,5 X 2006,5/0,3-3 MM PBPFPLNZ | N 906 661 01 |
| 9 | Flat contact housing PBPFPLNZ | 071 906 233 |
From the Type 19 workshop
Volkswagen Golf Mk2 work in the Type 19 workshop — the same cars these wiring looms diagrams are drawn from.
Fitment and applicability
What this plate covers, as the factory catalogue records it — nothing here is inferred from the part names.
- Vehicle
- Volkswagen Golf Mk2
- Model years
- 1989
- Generation region
- RDW
- Generation code
- 092
- Engine codes on this plate
- NZ, PB, PF, PL
- Variant tags
- petrol_16v, petrol_8v_base, petrol_8v_gti
- Factory group
- 06 Wiring looms
- Factory subgroup
- 253020
Related factory diagrams
Other published wiring looms plates for the MK2 Golf in this catalogue.
- Harness lambda probe transistorized ignition system wiring
- Wiring harness blowerwiring harness day driving headlights
- Wiring set battery 3 phase alternator earth line
- Diy wiring sets
- Wiring set dash panel connection piececentral electrics
- Wiring light seat heating
- Wiring harness rear view mirror central locking
- Rear wiring setwiring harness heated rear windoow rear
The complete MK2 Golf parts catalogue in print
Questions about this diagram
- Which VW part numbers are on the harness lambda probe transistorized ignition systemfor diagram for the MK2 Golf?
- This diagram lists 35 OEM part numbers for the MK2 Golf. The first three are N 906 437 01, 191 906 365 and 155 906 375 A.
- Which MK2 Golf years and engines does this diagram cover?
- This plate is from the MK2 Golf 1989 generation (RDW). The parts on it carry the engine codes NZ, PB, PF and PL.
- Where is the complete MK2 Golf factory parts catalogue?
- The Mk2 Golf Master Parts Catalogue is available in print and as a PDF from Type 19 Specialists at /shop/library/catalogue-mk2-full/. It carries every plate in this catalogue, not just this one.