Harness lambda probe transistorized ignition systemfor — MK2 Golf Wiring Looms (1990 - 1991)
Factory title: Volkswagen Golf (1990 - 1992) - Wiring set for battery and 3-phase alternator. Earth line
Harness lambda probe transistorized ignition systemfor for the Volkswagen Golf Mk2 (1990 - 1991): factory exploded diagram 253020 from the Volkswagen ETKA parts catalogue, group 06 Wiring looms, listing 55 OEM part numbers across 58 catalogued positions including 191 906 102, N 906 437 01 and N 906 333 01. Parts on this plate carry the engine codes NZ, PB, PF and PL. Published by Type 19 Specialists; the complete MK2 Golf catalogue is in print as the Mk2 Golf Master Parts Catalogue.
Parts on this diagram
This MK2 Golf plate lists 55 OEM part numbers across 58 numbered positions.
46 hotspots (partial)
| № | Description | Part number |
|---|---|---|
| harness for lambda probe andtransistorized ignition systemfor vehicles with Knock sensor Wiring set for control unitfor vehicles with retro fittedlambda regulated exhaustemission system see illustration: PG,PB,PF,PLNZ,RVPB PBPF | — | |
| (1) | harness for lambda probe also use: 000 979 133000 979 133 B PG,PF,NZ,RV 000 979 133000 979 133 B PFNZ | 701 971 108 |
| (11) | Protective cap PBPFPLNZ | 191 906 102 |
| (11C) | Cable tie with holder for weld pin: 10 X 1875 10 X 1875 PBPFPLNZ | N 906 437 01 |
| (11C) | Cable tie with holder for weld pin: 10 X 1005 10 X 1005 PBPFPLNZ | N 906 333 01 |
| (12) | Grommet 46/10 46/10 PBPFPLNZ | 357 971 905 E |
| (14) | flat connector housing Connection piecewiring harness: front right also use: 357 972 741 A 357 972 741 A PBPFPLNZ | 357 972 764 |
| (14) | flat connector housing Connection piecewiring harness: front right also use: 357 972 741 A 357 972 741 A PBPFPLNZ | 357 972 765 |
| (14) | flat connector housing Connection piecewiring harness: front right also use: 357 972 741 A 357 972 741 A PBPFPLNZ | 357 972 766 |
| (15) | flat connector housing also use:Connection piecewiring harness: front right 357 972 741 A NZ 357 972 741 A NZ | 357 972 764 |
| (18) | Flat contact housing also use: 701 905 142 701 905 142 PBPFPLNZ | 443 906 236 |
| (2) | wiring harness fortransistorized ignition system also use:Connection piecewiring harness: front right** see current flow diagram *F >> 1 G-MB 066 113*F >> 1 G-MW 448 221* 357 972 765 PB,PF,RVPB,PF,RV 357 972 765 PBPF | 191 971 758 BC |
| (2) | wiring harness fortransistorized ignition system PL PL | 191 971 150 D |
| (2) | wiring harness fortransistorized ignition system also use: DIGIFITZ 357 972 764 PL DIGIFITZ 357 972 764 PL | 191 971 150 E |
| (2) | wiring harness fortransistorized ignition system also use:Connection piecewiring harness: front right** see current flow diagram *F >> 1 G-MB 066 113*F >> 1 G-MW 448 221* 357 972 765 PB,PF,RVPB,PF,RV 357 972 765 PBPF | 191 971 758 AF |
| (2) | wiring harness fortransistorized ignition system also use:Connection piecewiring harness: front right** see current flow diagram *F >> 1 G-MB 066 113*F >> 1 G-MW 448 221* 357 972 765 PB,PF,RVPB,PF,RV 357 972 765 PBPF | 191 971 758 AE |
| (2) | wiring harness fortransistorized ignition systemfor models with catalyst also use:Connection piecewiring harness: front right** see current flow diagram * also use:Connection piece Knock sensor Contact F >> 1 G-MB 066 113*F >> 1 G-MW 448 221* 357 972 765000 979 021 N 903 352 02 PF,RVPF,RV 357 972 765000 979 021 N 903 352 02 PF | 191 971 758 BC |
| (2) | wiring harness fortransistorized ignition system Connection piece Knock sensor Contact F 1 G-MB 066 114>>*F 1 G-MW 448 222>>* PB,PF,RVPB,PF,RV PBPF | 191 971 758 BC |
| (2) | wiring harness fortransistorized ignition system also use:Connection piece Knock sensor Contact 1 G-MW 448221* 1 G-MB 066113*000 979 021000 979 133000 979 133 B PG 1 G-MW 448221* 1 G-MB 066113*000 979 021000 979 133000 979 133 B PBPFPLNZ | 191 971 758 AR |
| (2) | wiring harness fortransistorized ignition system Coupling element Injection valve F >> 1 G-LB 015 017*F >> 1 G-LW 083 402* NZNZ PBPFPLNZ | 191 971 761 D |
| (2) | wiring harness fortransistorized ignition system Coupling element Injection valve F 1 G-LB 015 018>> 1 G-LB 300 000*F 1 G-LW 083 403>> 1 G-LW 990 000* NZNZ PBPFPLNZ | 191 971 761 E |
| (2) | wiring harness fortransistorized ignition system F 1 G-M-000 001>> 1 G-MB 066 113*F 1 G-M-000 001>> 1 G-MW 448 221*F 1 G-M-000 001>> NZNZNZ PBPFPLNZ | 192 971 761 |
| (2) | wiring harness fortransistorized ignition system F 1 G-MB 066 114>>*F 1 G-MW 448 222>>*F 1 G-MP 312 206>>* NZNZNZ PBPFPLNZ | 191 971 761 F |
| (2) | wiring harness fortransistorized ignition system also use:Connection piece Knock sensor Contact >>1 G-MW 448221 >>1 G-MB 066113000 979 133000 979 133 B 000 979 021 PB,PF,RV >>1 G-MW 448221 >>1 G-MB 066113000 979 133000 979 133 B 000 979 021 PBPF | 192 971 758 AB |
| (2) | wiring harness fortransistorized ignition system also use:Connection piece Knock sensor Contact >>1 G-MW 448221 >>1 G-MB 066113000 979 133000 979 133 B 000 979 021 "GB.":PF >>1 G-MW 448221 >>1 G-MB 066113000 979 133000 979 133 B 000 979 021 PF | 192 971 758 AE |
| (3) | Cable ties 3,6 X 246 3,6 X 246 PBPFPLNZ | N 020 902 2 |
| (5) | Protective cap Flat contact housing PBPFPLNZ | 037 906 102 A |
| (6) | Grommet 18 X 20,5 18 X 20,5 PBPFPLNZ | 443 906 102 B |
| (7) | Flat contact housing Connection piece Lambda probe also use:F 1 G-M-000 001>> 357 972 741 A NZ 357 972 741 A NZ | 357 972 754 J |
| (7) | Flat contact housing also use:Connection piece Injection valve F 1 G-LB 015 018>>*F 1 G-LW 083 403>>* 357 972 741 A NZNZ 357 972 741 A PBPFPLNZ | 357 972 754 |
| (7) | flat contact housing withgasket also use:Connection piece Injection valve F >> 1 G-LB 015 017*F >> 1 G-LW 083 402* 357 972 741 A NZNZ 357 972 741 A PBPFPLNZ | 357 972 752 |
| (7) | Flat contact housing Connection piece Idling switchswitch - altitude corrector Switchthrottle valve adapterfuel metering valve Knock sensor PBPFPLNZ | 443 906 233 |
| (7) | Flat contact housing Connection piece Lambda probe F >> 1 G-LB 300 000 F >> 1 G-LW 990 000 NZNZ PBPFPLNZ | 443 906 233 |
| (7) | Flat contact housing Connection piece Lambda probe PBPFPLNZ | 357 972 754 J |
| (8) | flat contact housing withgasket PBPFPLNZ | 443 906 232 |
| 1 | harness for lambda probe PL PL | 443 971 108 A |
| 10 | Protective cap 20,5 X 11 20,5 X 11 PBPFPLNZ | 191 906 376 A |
| 11A | Bracket Lambda probe PG PBPFPLNZ | 191 971 501 A |
| 11A | No longer available PBPFPLNZ | — |
| 11B | Cable tie with hose retainer Connection piece Knock sensor 7 X 273-8 7 X 273-8 PBPFPLNZ | 443 957 818 C |
| 11C | Clip Connection piece Cross panel 3-12 3-12 PBPFPLNZ | 191 971 844 |
| 11D | Clip Connection piecefor idling speed RV PBPFPLNZ | 321 971 897 |
| 13 | Flat contact housing Connection piece Coupling element Ignition coil Lambda probe PBPFPLNZ | 111 971 921 B |
| 14 | flat connector housing Connection piecewiring harness: front right air condit. PBPFPLNZ | 161 971 975 |
| 15 | flat connector housing air condit. PBPFPLNZ | 161 971 988 C |
| 16 | rd. connector sleeve housing Connection piece Lambda probe PBPFPLNZ | 171 971 999 A |
| 17 | Grommet 12,5 X 31 12,5 X 31 PBPFPLNZ | 810 972 525 |
| 19 | oval head panel screw 2,9 X 9,5 2,9 X 9,5 PBPFPLNZ | N 013 953 7 |
| 19 | oval head panel screw B 2,9 X 9,5 B 2,9 X 9,5 PBPFPLNZ | N 013 953 2 |
| 4 | Cable ties 6,5 X 175 6,5 X 175 PBPFPLNZ | N 900 603 01 |
| 4 | Cable ties For hole/material thickness: 4,5 X 2006,5 / 0,3-3 4,5 X 2006,5 / 0,3-3 PBPFPLNZ | N 906 661 01 |
| 4 | Cable ties with brackettoothed quadrant For hole/material thickness: 4,5 X 2006,5 / 0,3-3 4,5 X 2006,5 / 0,3-3 PBPFPLNZ | 3D0 971 838 N |
| 9 | Flat contact housing PBPFPLNZ | 071 906 233 |
| 9A | flat contact housing withgasket PBPFPLNZ | 191 906 365 |
| 9B | flat contact housing withgasket PBPFPLNZ | 871 906 365 |
| 9C | Seal Flat contact housing 16 X 85,5 16 X 85,5 PBPFPLNZ | 155 906 375 A |
| 9C/9D | No longer available Flat contact housing 16 X 85,5 16 X 85,5 PBPFPLNZ | — |
| 9D | Seal Flat contact housing 16 X 50 16 X 50 PBPFPLNZ | 871 906 375 A |
From the Type 19 workshop
Volkswagen Golf Mk2 work in the Type 19 workshop — the same cars these wiring looms diagrams are drawn from.
Fitment and applicability
What this plate covers, as the factory catalogue records it — nothing here is inferred from the part names.
- Vehicle
- Volkswagen Golf Mk2
- Model years
- 1990 - 1991
- Generation region
- RDW
- Generation code
- 110
- Engine codes on this plate
- NZ, PB, PF, PL
- Variant tags
- petrol_16v, petrol_8v_base, petrol_8v_gti
- Factory group
- 06 Wiring looms
- Factory subgroup
- 253020
Related factory diagrams
Other published wiring looms plates for the MK2 Golf in this catalogue.
- Harness lambda probe transistorized ignition system wiring
- Wiring harness blowerwiring harness day driving headlights
- Wiring set battery 3 phase alternator earth line
- Diy wiring sets
- Wiring set dash panel connection piececentral electrics
- Wiring light seat heating
- Wiring harness rear view mirror central locking
- Rear wiring setwiring harness heated rear windoow rear
The complete MK2 Golf parts catalogue in print
Questions about this diagram
- Which VW part numbers are on the harness lambda probe transistorized ignition systemfor diagram for the MK2 Golf?
- This diagram lists 55 OEM part numbers for the MK2 Golf. The first three are 191 906 102, N 906 437 01 and N 906 333 01.
- Which MK2 Golf years and engines does this diagram cover?
- This plate is from the MK2 Golf 1990 - 1991 generation (RDW). The parts on it carry the engine codes NZ, PB, PF and PL.
- Where is the complete MK2 Golf factory parts catalogue?
- The Mk2 Golf Master Parts Catalogue is available in print and as a PDF from Type 19 Specialists at /shop/library/catalogue-mk2-full/. It carries every plate in this catalogue, not just this one.