Wiring set control unitfor vehicles retro fitted lambda — MK2 Golf Wiring Looms (1988)
Factory title: Volkswagen Golf (1988) - Wiring set for battery and 3-phase alternator. Earth line
Wiring set control unitfor vehicles retro fitted lambda for the Volkswagen Golf Mk2 (1988): factory exploded diagram 253001 from the Volkswagen ETKA parts catalogue, group 06 Wiring looms, listing 18 OEM part numbers across 19 catalogued positions including 191 971 149 B, 191 906 102 and 443 906 233. Parts on this plate carry the engine codes MH and PB. Published by Type 19 Specialists; the complete MK2 Golf catalogue is in print as the Mk2 Golf Master Parts Catalogue.
Parts on this diagram
This MK2 Golf plate lists 18 OEM part numbers across 19 numbered positions.
| № | Description | Part number |
|---|---|---|
| Wiring set for control unitfor vehicles with retro fittedlambda regulated exhaustemission system MH,PB MHPB | — | |
| (1) | Wiring set for control unit PB PB | 191 971 149 B |
| (4) | Protective cap PB PB | 191 906 102 |
| 1 | Wiring set for control unit MH MH | 191 971 149 A |
| 10 | Protective cap 20,5 X 11 MH 20,5 X 11 MH | 191 906 376 A |
| 11 | flat connector housing MH MH | 161 971 976 A |
| 12 | Flat contact housing MH MH | 161 971 990 A |
| 13 | single wiring seal for wire cross section: 5,6 X 7,81,5 MH 5,6 X 7,81,5 MH | 357 972 741 A |
| 2 | oval head panel screw B 2,9 X 9,5 MH B 2,9 X 9,5 MH | N 013 953 2 |
| 2 | oval head panel screw 2,9 X 9,5 MH 2,9 X 9,5 MH | N 013 953 7 |
| 3 | Cable ties 6,5 X 175 MH 6,5 X 175 MH | N 900 603 01 |
| 3 | Cable ties For hole/material thickness: 4,5 X 2006,5 / 0,3-3 MH 4,5 X 2006,5 / 0,3-3 MH | N 906 661 01 |
| 3 | Cable ties with brackettoothed quadrant For hole/material thickness: 4,5 X 2006,5 / 0,3-3 MH 4,5 X 2006,5 / 0,3-3 MH | 3D0 971 838 N |
| 4 | Grommet 18 X 20,5 MH 18 X 20,5 MH | 443 906 102 B |
| 5 | Flat contact housing MHPB | 443 906 233 |
| 6 | Grommet MH MH | 171 721 380 |
| 7 | flat contact housing withgasket MH MH | 037 906 240 |
| 8 | flat contact housing withgasket MH MH | 871 906 365 |
| 9 | Seal Flat contact housing 16 X 50 MH 16 X 50 MH | 871 906 375 A |
From the Type 19 workshop
Volkswagen Golf Mk2 work in the Type 19 workshop — the same cars these wiring looms diagrams are drawn from.
Fitment and applicability
What this plate covers, as the factory catalogue records it — nothing here is inferred from the part names.
- Vehicle
- Volkswagen Golf Mk2
- Model years
- 1988
- Generation region
- RDW
- Generation code
- 077
- Engine codes on this plate
- MH, PB
- Variant tags
- petrol_8v_base, petrol_8v_gti
- Factory group
- 06 Wiring looms
- Factory subgroup
- 253001
Related factory diagrams
Other published wiring looms plates for the MK2 Golf in this catalogue.
- Harness lambda probe transistorized ignition system wiring
- Wiring harness blowerwiring harness day driving headlights
- Wiring set battery 3 phase alternator earth line
- Diy wiring sets
- Wiring set dash panel connection piececentral electrics
- Wiring light seat heating
- Wiring harness rear view mirror central locking
- Rear wiring setwiring harness heated rear windoow rear
The complete MK2 Golf parts catalogue in print
Questions about this diagram
- Which VW part numbers are on the wiring set control unitfor vehicles retro fitted lambda diagram for the MK2 Golf?
- This diagram lists 18 OEM part numbers for the MK2 Golf. The first three are 191 971 149 B, 191 906 102 and 443 906 233.
- Which MK2 Golf years and engines does this diagram cover?
- This plate is from the MK2 Golf 1988 generation (RDW). The parts on it carry the engine codes MH and PB.
- Where is the complete MK2 Golf factory parts catalogue?
- The Mk2 Golf Master Parts Catalogue is available in print and as a PDF from Type 19 Specialists at /shop/library/catalogue-mk2-full/. It carries every plate in this catalogue, not just this one.