What are the brakes torque specs for a 1984 MK2 Golf?

Per the VW factory workshop manual (ELSA), the 1984 MK2 Golf brakes torque specifications are: Key values include: Brake caliper (rear) to brake pad carrier (self-locking bolt) at 35 Nm; Brake caliper (rear) to brake pad carrier (self-locking bolt) at 65 Nm; Brake disc splash shield to wheel bearing housing at 10 Nm. Full per-engine breakdown on this page.

What torque wrench setting do I need for MK2 Golf brakes?

Torque wrench settings vary by component. Key values include: Brake caliper (rear) to brake pad carrier (self-locking bolt) at 35 Nm; Brake caliper (rear) to brake pad carrier (self-locking bolt) at 65 Nm; Brake disc splash shield to wheel bearing housing at 10 Nm. Full per-engine breakdown on this page. Always use a calibrated torque wrench and follow the tightening sequence specified in the VW workshop manual.

Are MK2 Golf brakes torque values the same for all engine codes?

Not always. The 1984 MK2 Golf has 10 engine variants (HK, HZ, SB, MF, JK, ME, RV, GX, PF, EV). Some brakes torque values differ between engines — check the per-engine column on this page for your specific engine code.

Where do these MK2 Golf torque specifications come from?

Every torque value on this page is sourced directly from the Volkswagen Golf Mk2 Factory Workshop Manual (ELSA). Type 19 Specialists cross-references these against known errata and technical service bulletins.

Do I need to use stretch bolts for MK2 Golf brakes?

Some brakes fasteners on the MK2 Golf are torque-to-yield (stretch) bolts requiring a torque + angle sequence. These are indicated in the specifications table with a degree symbol (°) after the initial Nm value. Stretch bolts must not be reused.

Model year 1984 · Brakes

Brakes

Brake calipers, master cylinder, vacuum servo, ABS modulator, wheel cylinders, brake hoses, lug bolts.

10 components 12 distinct torque values 10 engines applicable

Source VW Golf Mk2 factory workshop manual Last updated 17 June 2026

10 of 139 published Mk2 Golf torques shown here. Full torque reference index →

This page lists factory torque specifications for brakes on the 1984 Volkswagen Golf Mk2. It covers 10 components across 10 engine variants (HK, HZ, SB, MF, JK, ME, RV, GX, PF, EV), with 12 distinct torque values sourced from the VW factory workshop manual. All values are given in Newton metres (Nm) with imperial equivalents where applicable.

Brakes

Brake caliper (rear) to brake pad carrier (self-locking bolt)
- 35 Nm (26 ft·lb) All 10 engines
- 65 Nm (48 ft·lb) All 10 engines
Brake disc splash shield to wheel bearing housing
- 10 Nm (87 in·lb) All 10 engines
Brake hose to brake caliper
- 15 Nm (11 ft·lb) All 10 engines
Brake pad carrier (rear) to stub axle flange (bolt) all except with ABS
- 65 Nm (48 ft·lb) All 10 engines
- 60 Nm (44 ft·lb) with ABS All 10 engines
Front brake caliper to wheel bearing housing socket-head bolt
- 25 Nm (18 ft·lb) All 10 engines
Hydraulic modulator to firewall
- 25 Nm (18 ft·lb) All 10 engines
Master cylinder to vacuum booster
- 20 Nm (15 ft·lb) All 10 engines
Rear wheel cylinder to backing plate
- 10 Nm (87 in·lb) All 10 engines
Vacuum booster to support bracket
- 20 Nm (15 ft·lb) All 10 engines
Wheel lug bolts
- 110 Nm (81 ft·lb) All 10 engines

Frequently asked — Brakes 1984

Questions sourced from real Google "People Also Ask" data. Answers cite the factory values on this page.

Are you supposed to put Loctite on brake caliper bolts?

Per the VW Golf Mk2 factory workshop manual, the brake caliper (rear) to brake pad carrier (self-locking bolt) torques to 35 Nm. Full per-engine variation in the table above.

Question sourceGoogle People Also Ask