What are the transmission & clutch torque specs for a 1987 MK2 Golf?

Per the VW factory workshop manual (ELSA), the 1987 MK2 Golf transmission & clutch torque specifications are: Key values include: Clutch cable locknut (4–6 Nm range) at 5 Nm; Clutch pressure plate assembly or torque converter drive plate to crankshaft at 30 Nm + 90°; Flywheel to clutch pressure plate at 20 Nm. Full per-engine breakdown on this page.

What torque wrench setting do I need for MK2 Golf transmission & clutch?

Torque wrench settings vary by component. Key values include: Clutch cable locknut (4–6 Nm range) at 5 Nm; Clutch pressure plate assembly or torque converter drive plate to crankshaft at 30 Nm + 90°; Flywheel to clutch pressure plate at 20 Nm. Full per-engine breakdown on this page. Always use a calibrated torque wrench and follow the tightening sequence specified in the VW workshop manual.

Are MK2 Golf transmission & clutch torque values the same for all engine codes?

Not always. The 1987 MK2 Golf has 15 engine variants (KR, PL, HZ, NZ, HK, ME, MF, JK, SB, EV, RP, GX, RV, 1P, PF). Some transmission & clutch torque values differ between engines — check the per-engine column on this page for your specific engine code.

Where do these MK2 Golf torque specifications come from?

Every torque value on this page is sourced directly from the Volkswagen Golf Mk2 Factory Workshop Manual (ELSA). Type 19 Specialists cross-references these against known errata and technical service bulletins.

Do I need to use stretch bolts for MK2 Golf transmission & clutch?

Some transmission & clutch fasteners on the MK2 Golf are torque-to-yield (stretch) bolts requiring a torque + angle sequence. These are indicated in the specifications table with a degree symbol (°) after the initial Nm value. Stretch bolts must not be reused.

Model year 1987 · Transmission & Clutch

Transmission & Clutch

Manual gearbox internals, clutch pressure plate, flywheel, driveshaft flanges.

9 components 29 distinct torque values 15 engines applicable

Source VW Golf Mk2 Factory Workshop Manual (ELSA) Last updated 17 June 2026

This page lists factory torque specifications for transmission & clutch on the 1987 Volkswagen Golf Mk2. It covers 9 components across 15 engine variants (KR, PL, HZ, NZ, HK, ME, MF, JK, SB, EV, RP, GX, RV, 1P, PF), with 29 distinct torque values sourced from the VW ELSA factory workshop manual. All values are given in Newton metres (Nm) with imperial equivalents where applicable.

Flywheel & Clutch

Clutch cable locknut (4–6 Nm range)
- 5 Nm (42 in·lb) All 15 engines
Clutch pressure plate assembly or torque converter drive plate to crankshaft
- 30 Nm +90° (22 ft·lb) All 15 engines
Flywheel to clutch pressure plate
- 20 Nm (15 ft·lb) All 15 engines
Torque converter cover plate — M10 bolt
- 25 Nm (18 ft·lb) All 15 engines
- 20 Nm (15 ft·lb) All 15 engines
- 15 Nm (11 ft·lb) All 15 engines
- 35 Nm (26 ft·lb) All 15 engines

Manual & Auto Gearbox

1. Tightening Torques Shift rod to selector lever (clamp bolt and nut)
- 26 Nm (19 ft·lb) All 15 engines
- 23 Nm (17 ft·lb) All 15 engines
- 18 Nm (13 ft·lb) All 15 engines
- 15 Nm (11 ft·lb) All 15 engines
- 50 Nm (37 ft·lb) All 15 engines
- 20 Nm (15 ft·lb) All 15 engines
- 10 Nm (89 in·lb) All 15 engines
5th gear lockout plunger
- 15 Nm (11 ft·lb) All 15 engines
- 10 Nm (89 in·lb) All 15 engines
- 25 Nm (18 ft·lb) All 15 engines
- 40 Nm (30 ft·lb) All 15 engines
- 150 Nm (111 ft·lb) All 15 engines
- 30 Nm (22 ft·lb) All 15 engines
Auto-trans 2nd gear brake band lock — M10
- 45 Nm (33 ft·lb) All 15 engines
- 75 Nm (55 ft·lb) All 15 engines
- 20 Nm (15 ft·lb) All 15 engines
- 10 Nm (87 in·lb) All 15 engines
- 8 Nm (71 in·lb) All 15 engines
- 23 Nm (17 ft·lb) All 15 engines
Reverse gear / upshift light switch
- 20 Nm (15 ft·lb) All 15 engines
- 30 Nm (22 ft·lb) All 15 engines
Ring gear to differential housing (bolt)
- 70 Nm (52 ft·lb) All 15 engines

Frequently asked — Transmission & Clutch 1987

Questions sourced from real Google "People Also Ask" data. Answers cite the factory values on this page.

How much torque for clutch bolts?

Every torque value for Transmission & Clutch 1987 is listed on this page, sourced directly from the VW Golf Mk2 factory workshop manual (ELSA). Use the per-component table above to find the exact figure for your engine variant.

Question sourceGoogle People Also Ask

How tight do clutch bolts need to be?

Question sourceGoogle People Also Ask